129 lines
3.9 KiB
Bash
Executable file
129 lines
3.9 KiB
Bash
Executable file
#!/bin/bash
|
|
|
|
# Function to prompt for input with a default value
|
|
prompt_input() {
|
|
local prompt=$1
|
|
local default=$2
|
|
read -p "$prompt [$default]: " input
|
|
echo "${input:-$default}"
|
|
}
|
|
|
|
# Function to create bridge interface text for additional IP
|
|
create_bridge_text() {
|
|
local ip=$1
|
|
local bridge_id=$2
|
|
echo "
|
|
auto vmbr${bridge_id}
|
|
iface vmbr${bridge_id} inet static
|
|
address ${ip}
|
|
netmask ${NETMASK}
|
|
bridge_ports none
|
|
bridge_stp off
|
|
bridge_fd 0
|
|
#LAN${bridge_id}"
|
|
}
|
|
|
|
# Collect inputs
|
|
MAINSERVERIP=$(prompt_input "MAIN_SERVER_IP" "192.168.0.1")
|
|
GATEWAYADDRESS=$(prompt_input "MAIN_SERVER_GATEWAY_ADDRESS" "192.168.0.254")
|
|
NETMASK=$(prompt_input "NETMASK" "255.255.255.0")
|
|
BROADCASTIP=$(prompt_input "BROADCASTIP" "192.168.0.255")
|
|
ADD_IP_ADDRESSES=$(prompt_input "ADDITIONAL_IP_ADDRESSES (comma-separated)" "")
|
|
NETWORK_INTERFACE=$(prompt_input "NETWORK_INTERFACE" "eth0")
|
|
|
|
# Display inputs for confirmation
|
|
echo "---------------------------------------------------------------------"
|
|
echo "You have entered the following configuration:"
|
|
echo "MAIN_SERVER_IP: $MAINSERVERIP"
|
|
echo "MAIN_SERVER_GATEWAY_ADDRESS: $GATEWAYADDRESS"
|
|
echo "NETMASK: $NETMASK"
|
|
echo "BROADCASTIP: $BROADCASTIP"
|
|
echo "ADDITIONAL_IP_ADDRESSES: $ADD_IP_ADDRESSES"
|
|
echo "NETWORK_INTERFACE: $NETWORK_INTERFACE"
|
|
|
|
echo "---------------------------------------------------------------------"
|
|
read -p "Is this correct? [yes/no]: " confirmation
|
|
|
|
if [[ $confirmation != [Yy]* ]]; then
|
|
echo "Exiting without changes."
|
|
exit
|
|
fi
|
|
|
|
# Split ADD_IP_ADDRESSES into an array
|
|
IFS=',' read -ra ADDR <<<"$ADD_IP_ADDRESSES"
|
|
|
|
# Initialize the interfaces file content
|
|
interfaces_content="
|
|
### Hetzner Online GmbH installimage
|
|
|
|
source /etc/network/interfaces.d/*
|
|
|
|
auto lo
|
|
iface lo inet loopback
|
|
iface lo inet6 loopback
|
|
|
|
iface ${NETWORK_INTERFACE} inet manual
|
|
up ip route add -net up ip route add -net ${GATEWAYADDRESS} netmask ${NETMASK} gw ${GATEWAYADDRESS} vmbr0
|
|
up sysctl -w net.ipv4.ip_forward=1
|
|
up sysctl -w net.ipv4.conf.${NETWORK_INTERFACE}.send_redirects=0
|
|
up sysctl -w net.ipv6.conf.all.forwarding=1
|
|
up ip route add 192.168.0.0/16 via ${ADDR[0]} dev vmbr0
|
|
up ip route add 172.16.0.0/12 via ${ADDR[0]} dev vmbr0
|
|
up ip route add 10.0.0.0/8 via ${ADDR[0]} dev vmbr0
|
|
|
|
iface ${NETWORK_INTERFACE} inet6 static
|
|
address 2a01:4f8:110:5143::2
|
|
netmask 64
|
|
gateway fe80::1
|
|
|
|
auto vmbr0
|
|
iface vmbr0 inet static
|
|
address ${MAINSERVERIP}
|
|
netmask 32
|
|
gateway ${GATEWAYADDRESS}
|
|
broadcast ${BROADCASTIP}
|
|
bridge-ports ${NETWORK_INTERFACE}
|
|
bridge-stp off
|
|
bridge-fd 0
|
|
pointopoint ${GATEWAYADDRESS}
|
|
#WAN
|
|
"
|
|
|
|
# Append bridge interfaces for each additional IP
|
|
for i in "${!ADDR[@]}"; do
|
|
interfaces_content+=$(create_bridge_text "${ADDR[i]}" "$((i + 1))")
|
|
done
|
|
|
|
# Save the new configuration to a temporary file
|
|
echo "$interfaces_content" > /tmp/new_interfaces
|
|
|
|
# Display the current network configuration
|
|
echo "---------------------------------------------------------------------"
|
|
echo "Current network configuration (/etc/network/interfaces):"
|
|
echo ""
|
|
cat /etc/network/interfaces
|
|
|
|
# Display the new network configuration
|
|
echo "---------------------------------------------------------------------"
|
|
echo ""
|
|
echo "New network configuration:"
|
|
cat /tmp/new_interfaces
|
|
|
|
# Show the differences
|
|
echo "---------------------------------------------------------------------"
|
|
echo "Configuration differences:"
|
|
echo ""
|
|
diff /etc/network/interfaces /tmp/new_interfaces
|
|
|
|
# Confirm before applying changes
|
|
echo "---------------------------------------------------------------------"
|
|
echo ""
|
|
read -p "Apply this network configuration? [yes/no]: " apply_conf
|
|
|
|
if [[ $apply_conf == [Yy]* ]]; then
|
|
mv /etc/network/interfaces /etc/network/interfaces.old
|
|
mv interfaces /etc/network/interfaces
|
|
echo "The network can be restarted with the following command: /etc/init.d/networking restart"
|
|
else
|
|
echo "Exiting without applying changes."
|
|
fi
|